Frost resistance of polyvinyl alcohol fiber and polypropylene fiber reinforced cementitious composites under freeze thaw cycling J Nam, G Kim, B Lee, R Hasegawa, Y Hama Composites Part B: Engineering 90, 241-250, 2016 | 90 | 2016 |
Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type G Choe, G Kim, M Yoon, E Hwang, J Nam, N Guncunski Cement and Concrete Research 116, 1-10, 2019 | 68 | 2019 |
Evaluation of concrete degradation depending on heating conditions by ultrasonic pulse velocity E Hwang, G Kim, G Choe, M Yoon, N Gucunski, J Nam Construction and Building Materials 171, 511-520, 2018 | 55 | 2018 |
Assessment of flexural toughness and impact resistance of bundle-type polyamide fiber-reinforced concrete H Kim, G Kim, N Gucunski, J Nam, J Jeon Composites Part B: Engineering 78, 431-446, 2015 | 49 | 2015 |
Static mechanical properties and impact resistance of amorphous metallic fiber-reinforced concrete H Kim, G Kim, J Nam, J Kim, S Han, S Lee Composite Structures 134, 831-844, 2015 | 47 | 2015 |
Effectiveness of fiber reinforcement on the mechanical properties and shrinkage cracking of recycled fine aggregate concrete J Nam, G Kim, J Yoo, G Choe, H Kim, H Choi, Y Kim Materials 9 (3), 131, 2016 | 42 | 2016 |
Compressive strength, resistance to chloride-ion penetration and freezing/thawing of slag-replaced concrete and cementless slag concrete containing desulfurization slag activator B Lee, G Kim, J Nam, B Cho, Y Hama, R Kim Construction and Building Materials 128, 341-348, 2016 | 33 | 2016 |
Strength and Microstructure of Class-C Fly Ash and GGBS Blend Geopolymer Activated in NaOH & NaOH + Na2SiO3 S Sasui, G Kim, J Nam, T Koyama, S Chansomsak Materials 13 (1), 59, 2019 | 30 | 2019 |
Strain rate effects on the compressive and tensile behavior of bundle-type polyamide fiber-reinforced cementitious composites H Kim, G Kim, S Lee, M Son, G Choe, J Nam Composites Part B: Engineering 160, 50-65, 2019 | 30 | 2019 |
Experimental investigation on the blast resistance of fiber-reinforced cementitious composite panels subjected to contact explosions J Nam, H Kim, G Kim International Journal of Concrete Structures and Materials 11 (1), 29-43, 2017 | 29 | 2017 |
Analysis of hydration heat and autogenous shrinkage of high-strength mass concrete GY Kim, EB Lee, JS Nam, KM Koo Magazine of Concrete Research 63 (5), 377-389, 2011 | 27 | 2011 |
Concrete corrosion cracking and transverse bar strain behavior in a reinforced concrete column under simulated marine conditions G Choe, Y Shinohara, G Kim, S Lee, E Lee, J Nam Applied Sciences 10 (5), 1794, 2020 | 24 | 2020 |
Comparative assessment of failure characteristics on fiber-reinforced cementitious composite panels under high-velocity impact J Nam, Y Shinohara, T Atou, H Kim, G Kim Composites Part B: Engineering 99, 84-97, 2016 | 23 | 2016 |
Effects of waste glass as a sand replacement on the strength and durability of fly ash/GGBS based alkali activated mortar S Sasui, G Kim, J Nam, A van Riessen, M Hadzima-Nyarko Ceramics International 47 (15), 21175-21196, 2021 | 20 | 2021 |
Effects of the strain rate and fiber blending ratio on the tensile behavior of hooked steel fiber and polyvinyl alcohol fiber hybrid reinforced cementitious composites M Son, G Kim, H Kim, S Lee, J Nam, K Kobayashi Cement and Concrete Composites 106, 103482, 2020 | 19 | 2020 |
Shrinkage properties of concretes using blast furnace slag and frost-resistant accelerator H Chol, J Lee, B Lee, J Nam Construction and Building Materials 220, 1-9, 2019 | 17 | 2019 |
Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature G Choe, G Kim, H Kim, E Hwang, S Lee, J Nam Construction and Building Materials 218, 448-456, 2019 | 16 | 2019 |
Chloride ion penetration resistance of slag-replaced concrete and cementless slag concrete by marine environmental exposure BK Lee, GY Kim, GT Kim, KS Shin, JS Nam Journal of the Korea Concrete Institute 29 (3), 299-306, 2017 | 16 | 2017 |
Creep behavior of high-strength concrete subjected to elevated temperatures M Yoon, G Kim, Y Kim, T Lee, G Choe, E Hwang, J Nam Materials 10 (7), 781, 2017 | 15 | 2017 |
Direct tensile behavior of amorphous metallic fiber-reinforced cementitious composites: Effect of fiber length, fiber volume fraction, and strain rate H Kim, G Kim, S Lee, G Choe, T Noguchi, J Nam Composites Part B: Engineering 177, 107430, 2019 | 14 | 2019 |